Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Glendale?
Chimney repair in Glendale typically runs $275 to $450 for a standard crown or flashing repair, $600 to $1,200 for masonry work on a damaged firebox or smoke chamber, and $1,800 to $4,500 for a full stainless liner replacement. Small fixes like a cracked crown seal or a new rain cap usually land under $400. Bigger structural repairs cost more because they involve materials, lift time, and the detail work it takes to keep a chimney safe.
We give written estimates before any work starts, and the estimate sets the final price. There’s no charge for the estimate. Every repair we do uses name-brand materials you can look up yourself – HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield – so you know exactly what’s going into your chimney and what backs it up.
Chimney Repair Cost Breakdown (2026)
The numbers below reflect what we see on chimney repair jobs in Glendale going into 2026. Each figure covers parts and labor. Your written estimate will narrow it to your chimney.
| Repair type | Typical cost range | What it covers |
|---|---|---|
| Crown repair or resurfacing | $275 – $650 | Weatherproofing the chimney crown, sealing hairline cracks, or rebuilding a badly damaged crown |
| Flashing repair or replacement | $300 – $750 | Resealing or replacing the metal flashing where the chimney meets the roof |
| Firebox and smoke chamber repair | $600 – $1,200 | Rebuilding damaged firebox brick, resurfacing the smoke chamber with HeatShield |
| Chimney cap and rain cap | $150 – $400 | Standard or custom cap sizing, installation, removal of an old damaged cap |
| Tuckpointing (brick and mortar joints) | $400 – $1,000 | Grinding out and repointing failing mortar joints on the chimney stack |
| Liner resurfacing (HeatShield) | $800 – $1,700 | Resurfacing a compatible clay liner rather than fully relining |
| Full stainless liner replacement (DuraFlex) | $1,800 – $4,500 | Removing the old liner and installing a new flexible stainless system with insulation |
| Full chimney rebuild (upper section) | $2,500 – $6,000 | Rebuilding loose or spalling brick on the visible portion above the roofline |
What pushes a Glendale job toward the high end? Height and access. Most Glendale homes sit on single-story or low-pitch rooflines, which helps. But a two-story stack with a steep pitch means more setup time and more fall protection, so those jobs run higher. Material choice matters too. A HeatShield resurfacing costs less than a full DuraFlex liner install because you’re keeping a compatible existing liner instead of replacing it. Age of the chimney plays a role – a chimney that has gone many seasons with a failing crown usually needs more than one repair.
What Affects Chimney Repair Pricing in Glendale
No two chimneys in Glendale fail the same way, and the price follows the problem. Here are the factors that move the number up or down.
- The type of chimney. A wood-burning masonry chimney with a brick firebox takes a different repair path than a gas fireplace with a metal flue. Masonry work involves mortar, brick, and cure time. Metal flue work involves fittings and components. The materials alone set a different baseline.
- Whether it’s a repair or a rebuild. Patching a crown is a day’s work. Rebuilding the top section of a chimney stack – brick by brick – is a multi-day job. The jump from $300 to $2,500 or more happens when the brick itself has spalled or the mortar has failed across a whole section.
- Liner condition. If the clay liner is cracked but structurally intact, resurfacing with HeatShield can save a lot compared to tearing it out and relining. If the liner is broken or the wrong size for the appliance, a full DuraFlex stainless liner is the right fix, and the price reflects the material and the insulation.
- Roofline access. A flat or walkable roof makes setup faster. A steep pitch or a chimney positioned away from a ridge means more ladder work and more safety gear, which adds labor time.
- Water damage already in place. Glendale’s monsoon season – July through September – pushes wind-driven rain hard against chimney tops. A crown that has been cracking for a couple of seasons lets water into the brick and the smoke chamber. Repairing the water damage costs more than repairing the crown would have, so early repair is cheaper than waiting.
- Materials specified. A repair built with traceable, professional-grade components costs more up front than a patch of generic mortar mix. But those components come with documented specs and manufacturer backing, so the job holds and you know what’s in your chimney.
How to Save on Chimney Repair
Chimney repair isn’t a place to cut corners on materials, but there are real ways to keep the total down without cutting into safety.
- Get an inspection before the problem grows. A crown crack that gets caught this season is a $275 – $650 fix. Left through a couple of monsoon cycles, it becomes water damage in the firebox and the cost climbs. Our chimney repair service covers this kind of early fix.
- Ask whether resurfacing will do instead of relining. If your clay liner passes inspection for structural integrity, HeatShield resurfacing can save hundreds compared to a full DuraFlex reline. We’ll tell you straight whether resurfacing is a real option or not.
- Bundle the small fixes. If the crown needs sealing and the flashing needs resealing, do both in a single visit. Combining small repairs in one appointment usually costs less than scheduling them separately.
- Get a written estimate before work starts. That’s standard for us, and it protects you – the price on the estimate is the price you pay. No surprises. Our estimates are free. Call (833) 734-6139 to schedule one.
- Keep up with sweeping. A chimney that’s swept regularly and inspected yearly heads off the bigger structural repairs. Sweeping is the cheapest chimney service there is, and it catches problems early.
Frequently Asked Questions – Chimney Repair Cost
How much does chimney repair cost in Glendale?
Most chimney repairs in Glendale run $275 to $1,200, depending on what’s wrong. Crown and flashing repairs are at the low end ($275 – $750). Firebox and smoke chamber work run $600 – $1,200. Liner replacement starts around $1,800 and goes up to $4,500 for larger or taller chimneys. Call (833) 734-6139 for a free written estimate that gives you the exact figure for your chimney.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper – HeatShield resurfacing costs $800 to $1,700, while a full DuraFlex liner replacement runs $1,800 to $4,500. But resurfacing only works if the existing liner is structurally sound. A cracked or wrong-size liner has to be replaced. Our inspection tells you which path applies before you spend anything. Call (833) 734-6139 to book an inspection.
How much does a chimney crown repair cost in Glendale?
Crown repair typically costs $275 to $650. A simple reseal of hairline cracks sits at the low end. A full crown rebuild, where the old crown is removed and a new one poured with a proper overhang, runs at the top of that range. It’s the most overlooked chimney repair, and one of the most important – a failed crown is one of the top causes of water damage in a chimney. Call (833) 734-6139 for an exact quote; estimates are free.
Can you come today?
Yes, same-day service is often available when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Our technicians have up to 8 years of experience and carry professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so the repair is done right the first time. Call (833) 734-6139.
Do you charge for a chimney repair estimate?
No. Estimates are free. We assess the chimney, show you what we found, and give you a written estimate before any work begins. The estimate sets the final price – no add-ons after the fact. Call (833) 734-6139 to schedule yours.
What to Expect When You Call
When you call Chimney Sweep Glendale, the first thing we do is ask what you’re seeing – smoke backing up, water stains on the ceiling, a loose brick, a smell. Then we schedule an inspection. Our technician comes out, looks at the full chimney, and writes up what’s found in plain language: what’s wrong, what it will cost to fix, and whether it can wait. You decide from there.
We handle sweep, inspection, and repair under one team, so nothing gets handed off mid-job. The repair work uses named, traceable materials – not generic compounds you’ve never heard of. Your chimney is a chimney, not a general contracting job, so every person who touches it works on chimneys specifically. Our Chimney Sweep Glendale service is where most homeowners start.
Pricing reflects the Glendale market as of 2026. Chimney Sweep Glendale offers free estimates – call (833) 734-6139. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Glendale.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gabriela Delgado"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Allison Miller"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Michelle Sutton