Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Glendale?
A chimney liner replacement in Glendale typically runs $1,800 to $4,500, and a partial chimney rebuild usually falls between $2,500 and $9,000 depending on how much of the structure has to come down. Full rebuilds from the smoke chamber up can reach $12,000 or more when the exterior stack is compromised. Most homes we see land in the middle of those ranges: a straightforward stainless liner for a standard masonry flue, or a rebuild of the top few courses above the roofline where Arizona sun and monsoon wind have done the most damage.
Those numbers are estimates, not quotes. The written estimate you get after an inspection sets the final price, and that estimate is free. Call (833) 734-6139. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Stainless liner replacement: typically $1,800 to $4,500
- HeatShield resurfacing of an existing flue: typically $1,200 to $3,200
- Partial rebuild (crown, top courses, flashing): typically $2,500 to $9,000
- Full chimney rebuild: typically $8,000 to $12,000+
- We install DuraFlex liner systems and use HeatShield for resurfacing, so the materials in your chimney have documented specs you can look up
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down by line item for the Glendale market. Ranges assume a single-flue masonry chimney on a typical single-story or two-story home.
| Line item | Typical range | What it covers |
|---|---|---|
| Chimney inspection (Level 2) | Free with estimate | Camera scan of the flue, crown, cap, flashing, and firebox |
| Stainless flexible liner (DuraFlex) | $1,800 – $4,500 | Insulated liner, top plate, cap, and connection to the appliance |
| HeatShield flue resurfacing | $1,200 – $3,200 | Ceramic resurfacing of a cracked or spalled clay flue that’s still structurally sound |
| Crown repair or rebuild | $450 – $1,400 | New mortar crown with proper slope and overhang |
| Top-course rebuild (above roofline) | $2,500 – $6,500 | Removing and rebuilding deteriorated brick and mortar at the stack top |
| Full chimney rebuild | $8,000 – $12,000+ | Full tear-down and rebuild from the roofline up, new flashing, new crown |
| Firebox and smoke chamber repair | $900 – $3,500 | Parging, refractory repair, or damper work done alongside the liner |
What pushes a job toward the top of a range? Access is the big one in Glendale. A chimney on a steep-pitch roof or tucked behind a tile roof valley takes longer to work around safely than one with a clean run to the ridge. Masonry condition matters just as much. A flue with hairline cracks can often be resurfaced with HeatShield and saved. A flue where the clay tiles have shifted or crumbled usually can’t, and a full liner becomes the correct call. Appliance type also shifts the number: a wood-burning fireplace insert needs a properly sized insulated liner, and a gas appliance has its own venting requirements, so the liner spec changes with what’s connected. Finally, if the crown and flashing are failing at the same time, doing that work during the liner install costs less than coming back to it later.
What Affects Chimney Liner & Rebuild Pricing in Glendale
- Flue size and shape. A straight rectangular flue is the simplest liner job. An offset flue, an oversized firebox, or a flue that’s been relined before with something non-standard adds labor and often requires a custom-fit liner instead of an off-the-shelf one.
- How much masonry has failed. Glendale’s summer heat and monsoon wind work on mortar joints year after year. When the damage is limited to the crown and top few courses, a partial rebuild is realistic. When brick faces are spalling several feet down the stack, the rebuild scope grows.
- Roof access and pitch. A low-slope roof section near the chimney makes the job quicker. A steep tile roof means more setup, more safety rigging, and more time, and that shows up in the labor line.
- Liner material and insulation. A properly insulated stainless liner costs more up front than an uninsulated one, and it’s what most manufacturers spec for wood appliances. We install DuraFlex because it’s what professional chimney techs specify, not because it’s the cheapest option.
- Whether resurfacing can save the flue. HeatShield resurfacing often costs less than half of a full reline and restores a flue that’s cracked but still sound. Whether it’s the right call depends on what the camera sees.
- What else gets corrected while the chimney is open. Damper repair, firebox parging, a new cap, and flashing work are all cheaper folded into a liner or rebuild job than scheduled separately.
How to Save on Chimney Liner & Rebuild
The biggest saving in this trade isn’t a discount. It’s catching the problem while it’s still small. A flue with early cracking can often be resurfaced with HeatShield for well under the cost of a full liner. A crown that’s starting to crack can be rebuilt for a few hundred dollars instead of waiting until water has worked down into the stack and forced a partial rebuild. Yearly inspection is how you stay on the cheap side of that line.
A few other practical moves:
- Get the inspection before you price the work. A liner quote without a camera scan is a guess. Our inspection report tells you exactly what we found, in plain language, so you can compare quotes on the same scope.
- Bundle related repairs. If the crown, cap, and flashing all need attention, doing them with the liner install saves the setup cost of a second visit.
- Ask whether resurfacing is an option before agreeing to a full reline. Sometimes it isn’t, and we’ll say so. But when the flue is a candidate, HeatShield resurfacing is a real cost difference.
- Don’t defer the crown. Crown repair is one of the least expensive items on the list and one of the most consequential to skip.
Estimates are free, and the written estimate is what sets the final price. Call (833) 734-6139 to book one.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Glendale?
A chimney liner in Glendale typically costs $1,800 to $4,500 installed, including the insulated liner, top plate, cap, and connection. Flue size, roof access, and whether the chimney needs any masonry work alongside it move the number within that range. Call (833) 734-6139 for an exact quote, since estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the flue is still structurally sound: HeatShield resurfacing typically runs $1,200 to $3,200 versus $1,800 to $4,500 for a full stainless reline. Once the clay tiles have shifted, cracked through, or separated, resurfacing won’t hold and a new liner is the correct repair. The camera inspection is what settles which side of that line you’re on. Call (833) 734-6139 and we’ll walk you through what we find.
How much does a chimney rebuild cost in Glendale?
A partial chimney rebuild in Glendale typically costs $2,500 to $9,000 depending on how many courses come down, and a full rebuild from the roofline up runs $8,000 to $12,000 or more. Crown-only work is much less, usually $450 to $1,400. The scope depends on how far the mortar and brick deterioration extends. Call (833) 734-6139 to get a written estimate on your stack.
Can you do the liner and the rebuild at the same time?
Yes, and it usually costs less than scheduling them separately. When the stack is already open for a rebuild, running the new liner in the same visit avoids a second setup and a second round of roof access. Most rebuilds we scope include the liner decision up front for exactly that reason. Call (833) 734-6139 to talk through the sequence.
How long does a chimney liner or rebuild take?
A stainless liner install is usually a single-day job. HeatShield resurfacing is also typically done in a day. A partial rebuild usually takes one to three days depending on curing time for the mortar, and a full rebuild runs longer. Weather and roof access affect the schedule. Call (833) 734-6139 and we’ll give you a realistic timeline with the estimate.
Why the Materials Matter More Than the Line Item
Two quotes for a liner can differ by a thousand dollars and look identical on paper. The difference is usually in what’s going in the flue. We install DuraFlex flexible liner systems and use HeatShield for resurfacing because both carry documented specs and manufacturer backing, which matters if anything ever needs to be verified or warrantied down the road. Unbranded liners and mystery sealants don’t give you that.
We also stock and train on Gelco, Olympia Chimney, Famco, and Copperfield components, so the parts in your chimney are named products with real specifications rather than generic substitutes. Sweep, inspect, repair: it’s all handled by the same team, start to finish, without a handoff to a second contractor mid-problem. Every job is a chimney job. Our technicians have up to experience, and that experience stays focused on chimneys rather than being split across unrelated home services.
If you’re comparing quotes, ask what brand of liner is being installed and whether the flue was camera-inspected first. Those two questions separate a real estimate from a number on a napkin.
What Happens When You Call
You call, we book an inspection, and a technician cameras the flue and checks the crown, cap, flashing, and firebox. You get a written report in plain language and a written estimate with line items, not a single lump number. If resurfacing will solve the problem, we’ll say so. If a full liner or rebuild is the correct repair, we’ll show you why. The estimate is free and the price is set per job by that written estimate.
If your chimney is failing on a Saturday, we’re closed that day. Call and we’ll book you for Sunday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Book a Free Estimate
Chimney liner and rebuild pricing in Glendale comes down to what the camera shows and how much masonry has to come down. Get the inspection first, get the written estimate, and price the job on real information. Call (833) 734-6139 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Glendale market as of 2026. Chimney Sweep Glendale offers free estimates – call (833) 734-6139.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gabriela Delgado"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Allison Miller"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Michelle Sutton